Broadcast Antennas

Folded Dipole Antenna for FM Broadcast 87.5 - 108 MHz

FM-ANT01

Centre-fed FM broadcast dipoles antennas are often described as omnidirectional. With no metal support pole or obstructions nearby, that might be true. However, the H-plane polar diagram in our datasheet shows a more accurate portrayal of real world deployment, mounted on a 2" pole at full boom length.

This antenna is DC ground for static protection and can be supplied with a mounting clamp to fit poles of up to 2 inch diameter (50.2mm).

Rugged enough for major FM broadcast networks, and economically priced for Local, Community or Campus radio this wideband model can be used at any frequency on the FM broadcast band. This makes it an ideal choice for emergency broadcasts, event, or other similar applications where the designated frequency might change.

This antenna can be mounted on a pole at roof-top sites or side-mounted at lattice mast sites. It can also be stacked (bayed) for extra gain.

Manufactured to survive adverse weather conditions, it ensures reliable service year-after-year.

Various custom systems including splitting and phasing harnesses are available.

2-element Yagi Antenna for FM Broadcast 87.5 - 108 MHz

FM-ANT02

For FM broadcast - or reception, in applications such as relays - this professional 2-element Yagi is surprisingly low in cost but very rugged. DC grounded for static protection, it can be supplied with a mounting clamp to fit poles of up to 2 inch diameter (50.2mm).

Rugged enough for major FM broadcast networks, and economically priced for Local, Community or Campus radio this antenna can be supplied at any frequency on the FM broadcast band.

This antenna can be mounted on a pole at roof-top sites or side-mounted at lattice mast sites. It can also be stacked (bayed) for extra gain.

Manufactured to survive adverse weather conditions, this antenna ensures reliable service year after year.

Various custom systems including splitting and phasing harnesses are available.

3-element Yagi Antenna for FM Broadcast 87.5 - 108 MHz

FM-ANT03

For FM broadcast - or reception, in applications such as relays - this professional 3-element Yagi is surprisngly low in cost but very rugged. DC grounded for static protection, it can be supplied with a mounting clamp to fit poles of up to 2 inch diameter (50.2mm).

Rugged enough for major FM broadcast networks, and economically priced for Local, Community or Campus radio this antenna can be supplied at any frequency on the FM broadcast band.

This antenna can be monted on a pole at roof-top sites or side-mounted at lattice mast sites. It can also be stacked (bayed) for extra gain.

Manufactured to survive adverse weather conditions, this antenna enures reliable service year-after-year.

Various custom systems including splitting and phasing harnesses are available.

End-fed Dipole Antenna for FM Broadcast 87.5 - 108 MHz

FM-ANT05

This highly popular antenna is excellent value, made in the UK, and gives great performance for FM broadcast, where omnidirectional vertical-plane coverage is required.

It can mount directly into the open-end of a 2" mast pole, giving a very neat appearance. Being low profile, the FM-ANT05 an ideal choice for sites in built-up areas and heritage areas.

A clamp is also available which provides the option to mount the antenna on the side of a pole. This enables standoff cantilever arrangements to be used, or for it to be mounted onto smaller diameter mast poles.

This end-fed antenna is unity-gain and provides a rugged and reliable solution, even in adverse weather conditions.

Lucoro Limited
Clay Pit Lane
Bar Lane Industrial Est
Roecliffe
York
YO51 9FS
United Kingdom

Phone: 01423 313550

Open: 8.30am to 4.30pm
Monday to Friday

Facebook Twitter
Our location Privacy Policy Terms of Use Cookie Policy ICO Registered

Copyright © 2023 Lucoro Ltd
All rights reserved.

Registered: 08349017

VAT: GB 153500641